Предмет: Русский язык, автор: bedarevaSv0750239

Когда пишется е в глаголах например: дерётся, а когда и например:подбирает.ПОЧЕМУ???

Ответы

Автор ответа: nlnatalja

корни с чередованием,
если нет суффикса А пишется в корне е дерётся
если есть после корня суффикс -а- пишется в корне и подбирает.

Автор ответа: ValeraYou

Есть суффикс А-пишите И. Нету-пишите Е.

Предыдущий вопрос

Следующий вопрос

Похожие вопросы

Предмет: Українська мова, автор: mrrnatala

Знайти значення виразу (5³)²- (5²)³ У сапису деякі цифри замінно зірочкою 14**|*7

1 год назад

Предмет: Қазақ тiлi, автор: Аноним

Киiз уй Киiз үй-мал баккан көшпелі халыктардын колайлы баспанасы. Оны тез кұрып, тез жинауға болады.Жазда салкын, кыста жылы болады.Киіз үй кереге, уык, шанырак және есіктен тұрады.( 27 сез: 1.Сөздерді тасымалдау ретімен жаза: Кереге, шанырак, есiк,киiз Тапсырма ||||

1 год назад

Предмет: Биология, автор: annadenusik

Які продукти слід уживати для профілактики цинги (скорбуту)?
А.житній хліб, крупи, дріжджі
Б.яйця, молоко, моркву
.Вриб'ячий жир, печінку тріски
Г.цитрусові, шипшину, смородину

1 год назад

Предмет: Английский язык, автор: V4FELK4

Переведите текст

FROM THE HISTORY OF RAILWAY CONSTRUCTION IN RUSSIA (I)

During its near two-centuries history the railway transport in Russia has gone a long and difficult way of evolutional development, from the first cast iron tram way to the world’s largest transport system.
The beginning of railway construction in Russia was connected with the development of the mining industry.
In 1764 the first wooden tram way was built by foreman K.D. Frolov at the Kolyvan - Voskresensk Works in the Urals.
Charles Gascoigne, a manager of the Alexander Gun Works in Petrozavodsk, suggested using cast- iron rails instead of wooden ones in 1788. The length of the line was only 174 m.
The first lengthy 2 km long cast iron horse driven railway was built in the Altai Mountains by an engineer R.K. Frolov in 1809. It was on that railway where elliptical rails were first used instead of angular ones.
The talented workmen E.A. Cherepanov and M.E. Cherepanov constructed the first Russian steam locomotive at the Nizhniy Tagil Works in the Urals. In August 1834 they opened the movement on the line. The Cherepanovs’ steam locomotive could haul a carriage (each has a capacity of 3.3 tons) with a speed of about 15 km/h. Alternatively it could carry 40 passengers. Later, in March 1835, the second locomotive was built. It could haul 17 tons of freight and the length of a new line was 3.5 km.
In 1834 the Czech engineer F.A. Gerstner, a professor of Vienna Polytechnic Institute came to Russia. It was him who suggested building a railway St.-Petersburg – Tsarskoye Selo for common use. The construction of the line was begun on the 1st of May 1836. The average height of the embankment was 2.9 meters and 23 wooden bridges were built along the way. The rails and fittings were ordered from abroad. The length of the line was 27 km. The gauge was 6 feet (1829 mm). Six locomotives were ordered from England and Belgium. The inauguration of the railway took place on the 11th of November, 1837.
This railway was soon followed by the construction of the St-Petersburg – Moscow railway. It was the first class double track line. The gauge used was 1524 mm. The work was directed by professors of St-Petersburg Institute of the Corps of Engineers P.P.Melnikov, D.I.Zhuravski and N.O.Kraft. 8 large bridges, 182 average and small bridges, 19 viaducts and 69 culverts were built along the way. The line was under construction for 8.5 years. It was opened on the 1st of November, 1851. This line played the leading role in further development of railway construction in Russia.

7 лет назад

Предмет: Русский язык, автор: fin1999

В приведённых ниже предложениях найдите и исправьте ошибки, допущенные в использовании форм прилагательных.

1) Учащиеся первой группы показали более лучшие результаты, чем учащиеся второй группы. 2) Этого паренька мне жальче. 3) Самой наисложнейшей проблемой было найти спонсора. 4) Эверест – сама наивысочайшая горная вершина. 5) Применение традиционных методов анализа окажется эффективным при работе с самыми чистейшими материалами.

7 лет назад