Предмет: Қазақ тiлi, автор: Burito99

Срочно срочно пажалуйста

Приложения:

Burito99: помагите

Ответы

Автор ответа: Nadjmii

сазгер, Сагырбаев, Шыгаев, адамгершиликке, алдымен, музыкамен

Burito99: это все !

Предыдущий вопрос

Следующий вопрос

Похожие вопросы

Предмет: Математика, автор: METRO2034

Допоможіть вирішити диференціальні рівняння (хоча б частково):
1) $y' = \sqrt{1-3y^2} *tg\pi t$
2) $(1-2y)*y'=\frac{2t+cos\frac{\pi }{3} }{sin3y}$
3) $y'*sin(y)^2=\frac{cos3x}{2y}$

1 год назад

Предмет: География, автор: Mirana050

Переведіть іменований масштаб «в 1 см - 350 км»
у числовий.

1 год назад

Предмет: География, автор: Аноним

БУДЬ ЛАСКА ДОПОМОЖІТЬ Я ВЖЕ З******Я, ХОЧА Б НА ОДНЕ ВІДПОВІДЬ

1 год назад

Предмет: Биология, автор: a205

Помогите пожалуйста 3.1.

7 лет назад

Предмет: Английский язык, автор: readhead65

помогите с переводом пожалуйста !
Basic Principles of Welding
The metallurgy of metal joining is important to the functional capabilities of the joint. The arc weld illustrates all the basic features of a joint. Three zones result from the passage of a welding arc: (1) the weld metal, or fusion zone, (2) the heat-affected zone, and (3) the unaffected zone.
The weld metal is that portion of the joint that has been melted during welding. The heat-affected zone is a region adjacent to the weld metal that has not been welded but has undergone a change in microstructure or mechanical properties due to the heat of welding. The unaffected material is that which was not heated sufficiently to alter its properties. Weld-metal composition and the conditions under which it freezes (solidifies) significantly affect the ability of the joint to meet service requirements. In arc welding, the weld metal comprises filler material plus
the base metal that has melted. After the arc passes, rapid cooling of the weld metal occurs. A one-pass weld has a cast structure with columnar grains extending from the edge of the molten pool to the centre of the weld. In a multipass weld, this cast structure may be modified, depending on the particular metal that is being welded.
The base metal adjacent to the weld, or the heat-affected zone, is subjected to a range of temperature cycles, and its change in structure is directly related to the peak temperature at any given point, the time of exposure, and the cooling rates. The types of base metal are too numerous to discuss here, but they can be grouped in three classes: (1) materials unaffected by welding heat, (2) materials hardened by structural change, (3) materials hardened by precipitation processes.
Welding produces stresses in materials. These forces are induced by contraction of the weld metal and by expansion and then contraction of the heat-affected zone.

7 лет назад