Предмет: Қазақ тiлi, автор: danka1

надо напимать на каз яз диалог на тему в библиотеке

Ответы

Автор ответа: катир

салем

сен кайда барасын?

мен кітапханага барамын

кітапханадан канда кітап аласын ?

кітаханадан ертегілер аламын

кітапханада журналдар бар ма?

иә ,кітапханада Балдырган , Айгөлек журналдары бар

маган балдырган журналы керек

жүр , бірге барайық

Предыдущий вопрос

Следующий вопрос

Похожие вопросы

Предмет: Русский язык, автор: dimatregubov

объясни значение слова гнездо из 2 го предложения . запеши своё объяснение

1 год назад

Предмет: Английский язык, автор: рамис1976

Составить предложение правильно из словосочетаний:do you,often,to the cinema,go

1 год назад

Предмет: Русский язык, автор: Аноним

у глагола разбил бы определите: 1)инфинитив 2)вид 3)переходность 4)возвратность 5)спряжение 6)наклонение 7)время 8)число 9)лицо 10)род. помогите плиз!

1 год назад

Предмет: Химия, автор: Bella9999

Определите эквивалентную массу: Na2CrO4

7 лет назад

Предмет: Английский язык, автор: pelmeshek777

Перевод текста "What is automation?"
Automation is the technology by which a process or procedure is performed with minimum human assistance.[1] Automation [2] or automatic control is the use of various control systems for operating equipment such as machinery, processes in factories, boilers and heat treating ovens, switching on telephone networks, steering and stabilization of ships, aircraft and other applications and vehicles with minimal or reduced human intervention. Some processes have been completely automated.

Automation covers applications ranging from a household thermostat controlling a boiler, to a large industrial control system with tens of thousands of input measurements and output control signals. In control complexity it can range from simple on-off control to multi-variable high level algorithms.

In the simplest type of an automatic control loop, a controller compares a measured value of a process with a desired set value, and processes the resulting error signal to change some input to the process, in such a way that the process stays at its set point despite disturbances. This closed-loop control is an application of negative feedback to a system. The mathematical basis of control theory was begun in the 18th century, and advanced rapidly in the 20th.

Automation has been achieved by various means including mechanical, hydraulic, pneumatic, electrical, electronic devices and computers, usually in combination. Complicated systems, such as modern factories, airplanes and ships typically use all these combined techniques. The benefit of automation include labor savings, savings in electricity costs, savings in material costs, and improvements to quality, accuracy and precision.

7 лет назад