Предмет: ОБЖ, автор: alenka120120

Помогите решить ребус

Приложения:

Ответы

Автор ответа: anastaesha15

Ответ:

ибермолнияу....,.......,..........наверное

Предыдущий вопрос

Следующий вопрос

Похожие вопросы

Предмет: Қазақ тiлi, автор: амина20161

ит олген жерине синоним

2 года назад

Предмет: Английский язык, автор: REpUls3

Нужен перевод текста ,срочно !!

what does an automated assembly line look like ? At the beginning of the line is a skeleton chassis. It has been lowered onto a moving truck by a robot crane. As it moves along , a robot drill press bends over , whirls a few minutes , and lifts . A few feet further along the line a metal hand drops a motor brace on the chassis . The rivets on the brace fit the holes drilled by the press . The metal hand holds the brace firmly in place and goes back . The car moves along the line . At each position apert is added and fastened . When the inside of the car are put in place , the assembly line reaches a second line. This is the line where the outer shells of the car are put together . In the same way thet motor , steering wheel, wheel , brakes , and other things have been added to the inner part of the car, fenders , hood , doors , accessories have been added to the body along another line . After that the car goes through apaint booth furnished with hightemperature drying lights . Finally it is at the end of the line - a finished car , as, yet untouched by human hands . On the assembly line , the complete engine is dropped onto the car. Where did that engine come from ? From the automated engine shop . In the engine shop , rows and rows of machines can be seen. They grind, drill, ream, polish , and periorm dozens of other operations . But not a machine operator can be seen . They can't be seen becaus there aren't any. these machine tools are all robot-run . A roughcast engine , fhresh from the foudry , enters the machine shop on a belt . The belt moves it under one machine. Reamers drop down and clean out the cylinders' holes, cutting and grinding the metal to the exact size . The engine moves on. Drill presses drop down, bore holes where they are needed, and withdraw. As the engine moves down the line , rappets , cilinders, crankshafts and spark-plugs are added. Then generator, fan,carburetor, and other parts. At the end of the line a robot crane picks up the engine and puts it on a belt for transfer to the main assembly line. In another part of the factory greatsheets of metal are put into giant rollers . The rollers twist , bend doors and bodies. These , too, are automatically assembled , then moved to the main assembly line . Each machine must be set so thet it will co-operate with all other machines in the factory.

2 года назад

Предмет: Русский язык, автор: kkkkkk051

спиши пары слов выделите в них основу и обозначьте варианты корней укажите чередующиеся гласные буквы бросать-выбрасывать,посылать-посол, сохнуть-засыхать , нести - носить , вдох - дыхание, ЗВЕНЕТЬ -ЗВОНИТЬ , ЗАГОРАТЬ - ЗАГАР, ЗАРЯ-ЗОРИ ,водить -веду зарание спасибо ))

2 года назад

Предмет: Қазақ тiлi, автор: zulfija75

Колбасшылар перевод на русский

8 лет назад

Предмет: Другие предметы, автор: sasa467

Сколько вытачек у прямой юбки
1)2
2)4
3)6
4)8
самые простые юбки по конструкции
1) прямые
2) клиньевые
3) конический
самая широкая коническая юбка
1) полусолнце
2) солнце
3) большой клёш
4) большой колокол
Какая мерка нужна для определения положения линии бёдер
1)Сб
2)Дст
3)Ди
4)Ст
Какая мерка служит основной для определения ширины
1)Дст
2)Ст
3)Ди
4)Сб
дам 20 баллов

8 лет назад