Предмет: Литература, автор: ira1612lyashenko

11.Правильно розставлено розділові знаки в усіх складносурядних реченнях, ОКРІМ а)Ще над Дніпром клубочеться задуха, і пахне степом сизий деревій. i б)Пливе над світом осінь, як медуза, і мокре листя падає на брук. в)Ось місяць в небесах завис - і віє скрізь відрадний холодок. г) Хтось гукнув з берега - і перевізник прокинувся.

Ответы

Автор ответа: Laradmysh

Відповідь: в) після слова <завис> ставимо кому. Г) замість тире— кома. ( але, якщо це цитата з твору, то може бути просто авторський розділовий знак, і тоді тире можливе)

Пояснення:

Предыдущий вопрос

Следующий вопрос

Похожие вопросы

Предмет: Русский язык, автор: lolurud

Запишите звуковые обозначения букв
ж щ ч ш

1 год назад

Предмет: Английский язык, автор: mirakle1

Выбрать правильный вариант: The secretary asked, “Will you go through the mail tomorrow, Mr. White?”

The secretary asked will you go through the mail Mr. White.

The secretary asked if Mr. White would go through the mail the next day.

The secretary asked if he will go through the mail the next day.

The secretary asked if he went through the mail the next day.

The secretary asked if Mr. White had gone through the mail the next day.

1 год назад

Предмет: Английский язык, автор: masterok2013

перевод текста
Electricity distribution is the penultimate stage in the delivery (before retail) of electricity to end users. It is generally considered to include medium-voltage (less than 50 kV) power lines, electrical substations and pole-mounted transformers, low-voltage (less than 1000 V) distribution wiring and sometimes electricity meters.
In the early days of electricity generation to about 1900, direct current (DC) generators were connected to loads at the same voltage. The generation, transmission and loads had to be of the same voltage because there was no way of changing DC voltage levels, other than inefficient motor-generator sets. Low DC voltages were used since that was a practical voltage for incandescent lamps, which were then the primary electrical load, and required less insulation to be safely distributed within buildings.
The losses in a cable are proportional to the square of the current, the length of the cable, and the resistivity of the material, and are inversely proportional to cross-sectional area. Early transmission networks were already using copper, which is one of the best economically feasible conductors for this application. To reduce the current and copper required for a given quantity of power transmitted would require a higher transmission voltage, but no convenient efficient method existed to change the voltage level of DC power circuits.