Ответ по предмету Алгебра: решите систему уравнений: а) {x+y=3 {y^2-xy=-1 б) {1/x+1/y=3/4 {x-y=2 с решением, пожалуйста!

Предмет: Английский язык, автор: ТомАндр

Mechanics
Mechanics is, in the most general sense, the study of forces and their effect upon matter. Typically, engineering mechanics is used to analyze and predict the acceleration and deformation (both elastic and plastic) of objects under known forces (also called loads) or stresses. Subdisciplines of mechanics include
• Statics, the study of non-moving bodies under known loads, how forces affect static bodies
• Dynamics (or kinetics), the study of how forces affect moving bodies
• Mechanics of materials, the study of how different materials deform under various types of stress
• Fluid mechanics, the study of how fluids react to forces[24]
• Kinematics, the study of the motion of bodies (objects) and systems (groups of objects), while ignoring the forces that cause the motion. Kinematics is often used in the design and analysis of mechanisms.
• Continuum mechanics, a method of applying mechanics that assumes that objects are continuous (rather than discrete)
Mechanical engineers typically use mechanics in the design or analysis phases of engineering. If the engineering project were the design of a vehicle, statics might be employed to design the frame of the vehicle, in order to evaluate where the stresses will be most intense. Dynamics might be used when designing the car's engine, to evaluate the forces in the pistons and cams as the engine cycles. Mechanics of materials might be used to choose appropriate materials for the frame and engine. Fluid mechanics might be used to design a ventilation system for the vehicle (see HVAC), or to design the intake system for the engine.
Mechatronics and robotics
Mechatronics is an interdisciplinary branch of mechanical engineering, electrical engineering and software engineering that is concerned with integrating electrical and mechanical engineering to create hybrid systems. In this way, machines can be automated through the use of electric motors, servo-mechanisms, and other electrical systems in conjunction with special software. A common example of a mechatronics system is a CD-ROM drive. Mechanical systems open and close the drive, spin the CD and move the laser, while an optical system reads the data on the CD and converts it to bits. Integrated software controls the process and communicates the contents of the CD to the computer.
Robotics is the application of mechatronics to create robots, which are often used in industry to perform tasks that are dangerous, unpleasant, or repetitive. These robots may be of any shape and size, but all are preprogrammed and interact physically with the world. To create a robot, an engineer typically employs kinematics (to determine the robot's range of motion) and mechanics (to determine the stresses within the robot).
Robots are used extensively in industrial engineering. They allow businesses to save money on labor, perform tasks that are either too dangerous or too precise for humans to perform them economically, and to ensure better quality. Many companies employ assembly lines of robots, especially in Automotive Industries and some factories are so robotized that they can run by themselves. Outside the factory, robots have been employed in bomb disposal, space exploration, and many other fields. Robots are also sold for various residential applications, from recreation to domestic applications.
Structural analysis
Structural analysis is the branch of mechanical engineering (and also civil engineering) devoted to examining why and how objects fail and to fix the objects and their performance. Structural failures occur in two general modes: static failure, and fatigue failure. Static structural failure occurs when, upon being loaded (having a force applied) the object being analyzed either breaks or is deformed plastically, depending on the criterion for failure. Fatigue failure occurs when an object fails after a number of repeated loading and unloading cycles. Fatigue failure occurs because of imperfections in the object: a microscopic crack on the surface of the object, for instance, will grow slightly with each cycle (propagation) until the crack is large enough to cause ultimate failure.
Failure is not simply defined as when a part breaks, however; it is defined as when a part does not operate as intended.
Выпишите из текста предложения, содержащие инфинитивный оборот. Подчеркните составные части оборота и укажите его вид. Переведите предложение.

1 год назад

Предмет: Русский язык, автор: uyliakiriluk

Найди имя существительное? Вправо,ужасный,солнце,объявил. Найди прилагательное?трещит,листья,сейчас,радостный. Найди глагол?хорошо ,улья,кричит,грустный. Подчеркни главные члены предложения:Птицы улетели на юг.

1 год назад

Предмет: Русский язык, автор: юля3324

какое из этих утверждений правильное отметь:
1) название города сочи м.р. ед.ч. не скл.
2) название города сочи ж.р. ед.ч. не скл.
3) название города сочи м.р. мн.ч. скл.
4) название города сочи ср. р. ед.ч. не скл.

1 год назад

Предмет: Музыка, автор: Dansimo

Найдите лишнее слово в каждом ряду.

8 лет назад

Предмет: Математика, автор: Natali200929

Одна сова за лито знищуе1000 полевых мишей и зберигае 20 мишкив зерна по 100кг кожен,сколько зерна за лито ест мишка

8 лет назад

решите систему уравнений: а) {x+y=3 {y^2-xy=-1 б) {1/x+1/y=3/4 {x-y=2 с решением, пожалуйста!

Ответы

решите систему уравнений:
а)
{x+y=3
{y^2-xy=-1
б)
{1/x+1/y=3/4
{x-y=2

с решением, пожалуйста!