Предмет: Русский язык, автор: nikgordeev2009

Прочитайте словарные слова. Определите, к какой части речи они относятся. Разделите на группы. Запишите без ошибок по группам (подпишите каждую). Проверьте еще раз. Если нашли ошибку, пропишите слово строчку без ошибок.

Медл.нно, со?нце, вп.р.ди, изд.л.ка, б.гатство, с.йчас, к.стрюля, чу?ство, с.годня, се.лка, слев., вч.ра, б.седа, ж.лезо, налев., сзад., к.ньки, св.бода, лучш., в.зде, за.тра,.

Ответы

Автор ответа: MariMari21

Ответ:

Наречие: Медленно, издалека, сейчас, сегодня, слева, вчера, налево, сзади, лучше, везде, завтра.

Существительное: Солнце, богатство, кастрюля, чувство, сеялка, беседа, железо, коньки, свобода.

Предлог: Впереди.

nikgordeev2009: спасибо большое !!!!

Предыдущий вопрос

Следующий вопрос

Похожие вопросы

Предмет: Русский язык, автор: Иришша08

В камом из слов ниже все согласные звуки твёрдые?

Гений Пробка

Кружка Щавель

2 года назад

Предмет: Английский язык, автор: misspolina030

work in pairs . Make up a dialogue (in the shop ) Tiny would like to clothes :-for his birthday party -for a picnic
составьте диалог
перевод:
работают в парах. Составьте диалог (в магазине) Крошечный хотел бы одежды: - За его день рождения - Для пикника
пожалуйста

2 года назад

Предмет: Английский язык, автор: blackproex

Переведите текст. Не через переводчик!

Plastics are non-metallic, synthetic, carbon-based materials. They can be moulded, shaped, or extruded into flexible sheets, films, or fibres. Plastics are synthetic polymers. Polymers consist of long-chain molecules made of large numbers of identical small molecules (monomers). The chemical nature of a plastic is defined by the monomer (repeating unit) that makes up the chain of the polymer. Polyethene is a polyolefin; its monomer unit is ethene (formerly called ethylene). Other categories are acrylics (such as polymethylmethacrylate), styrenes (such as polystyrene), vinys (such as polyvinyl chloride (PVC)), polyesters, polyurethanes, polyamides (such as nylons), polyethers, acetals, phenolics, cellulosics, and amino resins. The molecules can be either natural — like cellulose, wax, and natural rubber — or synthetic — in polyethene and nylon. In co-polymers, more than one monomer is used.The giant molecules of which polymers consist may be linear, branched, or cross-linked, depending on the plastic. Linear and branched molecules are thermoplastic (soften when heated), whereas cross-linked molecules are thermosetting (harden when heated).Most plastics are synthesized from organic chemicals or from natural gas or coal. Plastics are light-weight compared to metals and are good electrical insulators. The best insulators now are epoxy resins and teflon. Teflon or polytetrafluoroethene (PTFE) was first made in 1938 and was produced commercially in 1950.Plastics can be classified into several broad types.1. Thermoplastics soften on heating, then harden again when cooled. Thermoplastic molecules are also coiled and because of this they are flexible and easily stretched.Typical example of thermoplastics is polystyrene. Polystyrene resins are characterized by high resistance to chemical and mechanical stresses at low temperatures and by very low absorption of water. These properties make the polystyrenes especially suitable for radio-frequency insulation and for parts used at low temperatures in refrigerators and in airplanes. PET (polyethene terephthalate) is a transparent thermoplastic used for soft-drinks bottles. Thermoplastics are also viscoelastic, that is, they flow (creep) under stress. Examples are polythene, polystyrene andPVC.2. Thermosetting plastics (thermosets) do not soften when heated, and with strong heating they decompose. In most thermosets final cross-linking, which fixes the molecules, takes place after the plastic has already been formed.Thermosetting plastics have a higher density than thermoplastics. They are less flexible, more difficult to stretch, and are less subjected to creep. Examples of thermosetting plastics include urea-formaldehyde or polyurethane and epoxy resins, most polyesters, and phenolic polymers such as phenol-formaldehyde resin.3. Elastomers are similar to thermoplastics but have sufficient cross-linking between molecules to prevent stretching and creep.

2 года назад

Предмет: Математика, автор: Danuyfaaag

Упростите выражение и найдите значение (а+1)(a-1)(a+1)-(9+a2)2

9 лет назад

Предмет: История, автор: lgavriloff2016

какие были в истории татарстана новые развитии в вывозимые ввозимые товары в 18 веке

9 лет назад