Предмет: Немецкий язык, автор: Iisusa06

Выберите правильный вариант ответа и занесите их в бланк ответов .
A7. Anna und Otto … noch klein.
a)
ist b) sind c) bin
A8. Sabine ist klein, … lernt nicht, … spielt.
a)
er b) wir c) sie
A9. Frau Fuchs … in der Schule. Sie ist Lehrerin.
a)
arbeitet b) arbeiten c) arbeit
A10. Herr Kramer sagt: “Peter, du … nicht besonders gut.”
a)
lerne b) lernst c) lernt
A11. Der Maler hat alle Blumen auf dem Bilde bunt … .
a)
gebemalt b) begemalt c)bemalt
A12. Ich fahre am Samstag gern nach Moskau. Und wohin … du am Samstag?
a)
fahrt b) fahrst c)fӓhrst
A13. Der Deutschlehrer Herr Fix sagt: “Ihr alle habt prima … .”
a)
gearbeitet b) arbeitet c) gearbeit
A14. “ Ich freue … euch wieder zu sehen” – sagt uns die Lehrerin.
a)
sich b) mich c) dich
A15. Friedrich, … du jetzt Hausaufgaben machen oder gehst du spazieren?” fragt die Oma.
a)
willst b) will c) wollst
A16. … Telefonzelle rechts steht ein Hund, er ist gross und schӧn.

A17. Anna … das Heft und schreibt sehr fleissig alle Ubungen.
a)
Nehmen b) nehmt c) nimmt
A18. Der Winter ist da. Es schneit. Die schneeflocken fallen … .
a)
in die Erde b) auf die Erde c) an die Erde
A19. Sandra wohnt in Berlin. ... Stadt ist gross und schön.
a) Seine b) Deine c) Ihre
A20. Jeder Schüler … gut lernen. Nicht wahr?
a)
müssen b) müsst c) muss
A21. Alle Schüler aus unserer Klasse sind gut in Deutsch, … ist aber Mischa Iwanow.
a)
der gutste b) der beste c) guter
A22. Herr Braun lernt … . Er arbeitet.
a)
kein b) nicht c) nein
A23. Der Fluss Wolga in Russland ist … als die Elbe in Deusctland.
a) am lӓngsten b) langer c) lӓnger
A24. Ich wohne in Russland. … Familie ist nicht gross, sondern klein.
a)
meine b) deine c) seine

Ответы

Автор ответа: larmih
2

A7. Anna und Otto … noch klein.

a)

b) sind

A8. Sabine ist klein, … lernt nicht, … spielt.

a)

c) sie

A9. Frau Fuchs … in der Schule. Sie ist Lehrerin.

a)

arbeitet

A10. Herr Kramer sagt: “Peter, du … nicht besonders gut.”

a)

b) lernst  

A11. Der Maler hat alle Blumen auf dem Bilde bunt … .

a).

c) bemalt

A12. Ich fahre am Samstag gern nach Moskau. Und wohin … du am Samstag?

a)

c)fährst

A13. Der Deutschlehrer Herr Fix sagt: “Ihr alle habt prima … .”

a.)

gearbeitet

A14. “ Ich freue … euch wieder zu sehen” – sagt uns die Lehrerin.

a)

b) mich

A15. Friedrich, … du jetzt Hausaufgaben machen oder gehst du spazieren?” fragt die Oma.

a)

willst

A16. … Telefonzelle rechts steht ein Hund, er ist gross und schӧn.

??

A17. Anna … das Heft und schreibt sehr fleissig alle Ubungen.

a)

c) nimmt

A18. Der Winter ist da. Es schneit. Die Schneeflocken fallen … .

a)

b) auf die Erde

A19. Sandra wohnt in Berlin. ... Stadt ist gross und schön.

c) Ihre

A20. Jeder Schüler … gut lernen. Nicht wahr?

a)

c) muss

A21. Alle Schüler aus unserer Klasse sind gut in Deutsch, … ist aber Mischa Iwanow.

a)

b) der beste

A22. Herr Braun lernt … . Er arbeitet.

a)

b) nicht

A23. Der Fluss Wolga in Russland ist … als die Elbe in Deusctland.

c) länger

A24. Ich wohne in Russland. … Familie ist nicht gross, sondern klein.

a)

meine


gogogogogogogo72: А что значит, если ты добавляешь ещё и a) в ответ и другой ещё, например b),c)?
Похожие вопросы
Предмет: Английский язык, автор: xertdx
1. Найдите в правой колонке русские эквиваленты слов и словосочетаний: 1 engine lathe a. задняя бабка 2. turning b. фартук (суппорта) 3. drilling c. каретка 4. screw cutting d. передняя бабка 5. headstock e. сверление 6. tailstock f. токарно-винторезный станок 7.saddle g. нарезание винтов 8. lever h. рычаг 9. apron i. рукоятка 10. carriage j. суппорт 11. guideways k. обточка 12. handle l. направляющие (станка) 2. Переведите на русский язык встречающиеся в тексте интерна¬циональные слова: metal, operation, principal, spindle, function, centre, control, base, special, bolt. 1. gearbox and headstock; 2. tailstock; 3. frame; 4. spindle; 5. feed gearbox; 6. electric motor; 7. control panel; 8. cross slide, 9. carriage; 10. tool block; 11. ways; 12. lead screw; 13. feed rod; 14. operating lever shaft; 15. operating and reverse handle; 16, apron; 17. hand feed wheel 3. Простите текст и выполните следующие за ним упражнения: ENGINE LATHE 1. The engine lathe is the most commonly used machine-tool. It is used ; variety of metal operations, such as turning, drilling, screwcutting and many others. 2. The principal units of the lathe are the bed, the headstock, the tailstock and the carriage with the apron 3. The bed is the base of any machine-tool and it is made of grey iron on which the saddle and the tailstock slide along special guideways. The headstock is also located and bolted on the bed. 4. The headstock contains the spindle and the speed gearbox. The spindle is the part of the machine to which power is applied to rotate the work. The changing of the spindle speed is effected by levers. 5. The tailstock consists of a casting fitted to the bed. The function of the tailstock is to support one end of the work turned between centres and to mount the tools. 6. The carriage of the lathe, which carries the tool, is made up of two principal parts: the saddle and the apron. The saddle travels along the guideways of the bed. The apron represents the front wall of the carnage. On the front of the apron are mounted the handles and levers by which the actions of the tool are controlled. 4. Переведите на русский язык в письменной форме абзацы 3,4 и 5. 5. Найдите соответствующие ответы на вопросы и напишите их в той последовательности, в которой заданы вопросы: Вопросы 1. What operations is the engine lathe used for? 2. What are the principal units of the lathe? 3. What units are located on the bed? 4. What is the function of the tailstock? 5. Where are the handles and levers mounted? Ответы a. To support one end of the work turned between centres. b. On the front of the apron. c. For turning, drilling, screwcutting and others. d,.The headstock, the saddle and the tailstock. e. The bed, the headstock, the tailstock and the carriage with the apron. 6. Закончите предложения, выбрав соответствующий вариант окончания: 1. The unit that contains the spindle and the gearbox is 2. The unit that supports one end of the work turned be¬tween centres is called.... 3. The unit which carries the tool is called .... a) the carriage; b) the headstod c) the tailstock 4. The unit on saddle and the is called … a) the carriage b) the bed; c) the headstod 5. The units, actions of the tool are controlled, are called.... a) guideways; b) the saddle and the apron; c) levers and handles.
Предмет: Математика, автор: Murtazalievaz