Предмет: Алгебра, автор: sevamamedov200oyp1jv

Дана арифметическая прогрессия: −21, −24,−27... Найди тридцатый член данной прогрессии.
ПЛИЗ ПОМОГИТЕ!!!!!!!!!!!!!

Ответы

Автор ответа: rubydisney15
0

Ответ:-111

Объяснение:

Автор ответа: olala2151
0

Ответ:-117

Объяснение:

sevamamedov200oyp1jv: спасибо
Предыдущий вопрос
Следующий вопрос
Похожие вопросы
Предмет: Английский язык, автор: Shebl88

Составте 6 предложений о том что я делал на зимних каникулах и 6 предложений что мой друг делал на зимних каникулах
1 год назад
Предмет: Русский язык, автор: LiliyaIsteriya

Морфемный разбор слов: звездочка,зимушка,городской,переходят,домишко,стебелек
1 год назад
Предмет: Английский язык, автор: леша15523215

 Выпишите из текста предложения с глаголами в форме причастия или герундия или сослагательном наклонении.

 

Types of Loading

        As to the manner in which loads are applied or transmitted to a structure of machine they may be considered as static loads, repeated loads, impact and energy loads.

       1 .In static, steady or dead loads are forces that are applied slowly and remain nearly constant after being applied to the body such as the loads on most buildings or the load applied to a bar in the usual type of testing machine.

Repeated loads are forces that are applied a very large number of times causing a stress in the material that is continually changing, usually through some definite range. Such are the loads applied to the connecting rod of an engine is running, the wheel loads on a railroad rail as a train passes over the rail and similar ones. Impact loads are forces that are applied to the resisting body in a relatively short period of time. An impact load, in general, is applied by a moving body when it comes in contact with the resisting body. The force exerted by the moving body and the period during which it acts in general cannot be determined. For this reason in some problems it is more satisfactory to calculate the stress and strain produced by an impact load from the energy delivered to the resisting body by the moving body.

       Other Classifications of Loads.-Loads may be classified as distributed loads and concentrated loads. A distributed load may be uniformly distributed or non-uniformly distributed. A concentrated load is one whose area of contact with the resisting body is negligible in comparison with the area of the resisting body.

II. Write out from the text the sentences with verbs in the form of the Participle or the Gerund or the Subjunctive mood.
1 год назад
Предмет: Математика, автор: yanaeroxina18
Найди 1-3числа 25674;от 3-4от 23764
8 лет назад
Предмет: Математика, автор: 545423
вырази .в метрах 15 км .5км 700 м .90дм .3500 см .В километрах 7 т.80ц.9ц.3000г.6т.8ц.92ц.50кг.В секундах 5мин.15мин.20мин.30с.7мин.5с.
8 лет назад