Предмет: История, автор: LoooooliK

Причины падения Османской империи

Ответы

Автор ответа: vladsurgut2003
3
16 ноября 1922 года Мехмед VI, формально еще остававшийся халифом, обратился к британским военным властям с просьбой вывезти его из Стамбула. 17 ноября он покинул Стамбул на борту британского линкора «Малайя» .

Османская империя, слабея, попыталась опереться на помощь Германии, но это только втянуло её в Первую мировую войну (1914), закончившуюся поражением Четверного союза [1]. В течение 1917—1918 гг. союзники занимают ближневосточные владения Османской империи. После Первой мировой войны Сирия и Ливан перешли под контроль Франции, Палестина, Иордания и Ирак — Великобритании; на западе Аравийского полуострова при поддержке англичан (Лоуренс Аравийский) образовались независимые государства: Хиджаз, Неджд, Асир и Йемен. Впоследствии Хиджаз и Асир вошли в состав Саудовской Аравии. 30 октября 1918 было заключено Мудросское перемирие, за которым последовал Севрский мирный договор (10 августа 1920). Фактически Османская империя была расчленена. 1 ноября 1922 года Великое национальное собрание Турции приняло закон о разделении султаната и халифата, при этом султанат упразднялся. Так закончилась более чем шестивековая история Османской империи.
Похожие вопросы
Предмет: Английский язык, автор: readhead65
помогите с переводом пожалуйста !
Basic Principles of Welding
The metallurgy of metal joining is important to the functional capabilities of the joint. The arc weld illustrates all the basic features of a joint. Three zones result from the passage of a welding arc: (1) the weld metal, or fusion zone, (2) the heat-affected zone, and (3) the unaffected zone.
The weld metal is that portion of the joint that has been melted during welding. The heat-affected zone is a region adjacent to the weld metal that has not been welded but has undergone a change in microstructure or mechanical properties due to the heat of welding. The unaffected material is that which was not heated sufficiently to alter its properties. Weld-metal composition and the conditions under which it freezes (solidifies) significantly affect the ability of the joint to meet service requirements. In arc welding, the weld metal comprises filler material plus
the base metal that has melted. After the arc passes, rapid cooling of the weld metal occurs. A one-pass weld has a cast structure with columnar grains extending from the edge of the molten pool to the centre of the weld. In a multipass weld, this cast structure may be modified, depending on the particular metal that is being welded.
The base metal adjacent to the weld, or the heat-affected zone, is subjected to a range of temperature cycles, and its change in structure is directly related to the peak temperature at any given point, the time of exposure, and the cooling rates. The types of base metal are too numerous to discuss here, but they can be grouped in three classes: (1) materials unaffected by welding heat, (2) materials hardened by structural change, (3) materials hardened by precipitation processes.
Welding produces stresses in materials. These forces are induced by contraction of the weld metal and by expansion and then contraction of the heat-affected zone.
Предмет: Математика, автор: milli3262