Предмет: Русский язык, автор: пупсик27

составь предложения из слов.варя сказки любят Миша и загадки и

20Maria14: Варя и Миша любят сказки и загадки.

Константин56: да

Полиночка2004Даутова: да

пупсик27: спасибо

Полиночка2004Даутова: пожалуйста

Ответы

Автор ответа: Константин56

Варя и Миша любят сказки и загадки

Автор ответа: Полиночка2004Даутова

Варя и Миша любят сказки и загадки.

Предыдущий вопрос

Следующий вопрос

Похожие вопросы

Предмет: Английский язык, автор: Fedor122790

Помогите решить мцко по английскому!!!

1 год назад

Предмет: Английский язык, автор: sanэ

Помогите перевести текст 100 баллов

As a non-consumable electrodes tungsten or carbon electrodes can be used. In gas-tungsten arc welding a tungsten electrode is used in place of the metal electrode used in shielded metal-arc welding. A chemically inert gas, such as argon, helium, or carbon dioxide is used to shield the metal from oxidation. The heat from the arc formed between the electrode and the metal melts the edges of the metal. Metal for the weld may be added by placing a bare wire in the arc or the point of the weld. This process can be used with nearly all metals and produces a high-quality weld. However, the rate of welding is considerably slower than in other processes.

Gas-Metal Arc
In gas-metal welding, a bare electrode is shielded from the air by surrounding it with argon or carbon dioxide gas and sometimes by coating the electrode with flux. The electrode is fed into the electric arc, and melts off in droplets that enter the liquid metal of the weld seam. Most metals can be joined by this process.

Submerged Arc
Submerged-arc welding is similar to gas-metal arc welding, but in this process no gas is used to shield the weld. Instead of that, the arc and tip of the wire are submerged beneath a layer of granular, fusible material that covers the weld seam. This process is also called electroslag welding. It is very efficient but can be used only with steels.

Resistance Welding
In resistance welding, heat is obtained from the resistance of metal to the flow of an electric current. Electrodes are clamped on each side of the parts to be welded, the parts are subjected to great pressure, and a heavy current is applied for a short period of time. The point where the two metals touch creates resistance to the flow of current. This resistance causes heat, which melts the metals and creates the weld. Resistance welding is widely employed in many fields of sheet metal or wire manufacturing and is often used for welds made by automatic or semi-automatic machines especially in automobile industry.

1 год назад

Предмет: Русский язык, автор: privetvsemmmmmm

7 предложение на тему зима в настоящим времени

1 год назад

Предмет: Алгебра, автор: dimadolgih603

1)|5x-4(2x+30)|=6
Найдите корень уравнения

7 лет назад

Предмет: Алгебра, автор: Аноним

Помогите пожалуйста с пример под циферкой 4❤️

7 лет назад