Предмет: Русский язык, автор: andreц2000

могучий проверить букву и

Ответы

Автор ответа: Лиза3333

В данном слове окончание "ий".Буквы в окончании не проверяются.И как-то сомневаюсь,что можно написать это слово по-другому.

Предыдущий вопрос

Следующий вопрос

Похожие вопросы

Предмет: Русский язык, автор: luss55

помогите пожалуйста ребенку

2 года назад

Предмет: Английский язык, автор: Fedor122790

Помогите решить мцко по английскому!!!

2 года назад

Предмет: Английский язык, автор: sanэ

Помогите перевести текст 100 баллов

As a non-consumable electrodes tungsten or carbon electrodes can be used. In gas-tungsten arc welding a tungsten electrode is used in place of the metal electrode used in shielded metal-arc welding. A chemically inert gas, such as argon, helium, or carbon dioxide is used to shield the metal from oxidation. The heat from the arc formed between the electrode and the metal melts the edges of the metal. Metal for the weld may be added by placing a bare wire in the arc or the point of the weld. This process can be used with nearly all metals and produces a high-quality weld. However, the rate of welding is considerably slower than in other processes.

Gas-Metal Arc
In gas-metal welding, a bare electrode is shielded from the air by surrounding it with argon or carbon dioxide gas and sometimes by coating the electrode with flux. The electrode is fed into the electric arc, and melts off in droplets that enter the liquid metal of the weld seam. Most metals can be joined by this process.

Submerged Arc
Submerged-arc welding is similar to gas-metal arc welding, but in this process no gas is used to shield the weld. Instead of that, the arc and tip of the wire are submerged beneath a layer of granular, fusible material that covers the weld seam. This process is also called electroslag welding. It is very efficient but can be used only with steels.

Resistance Welding
In resistance welding, heat is obtained from the resistance of metal to the flow of an electric current. Electrodes are clamped on each side of the parts to be welded, the parts are subjected to great pressure, and a heavy current is applied for a short period of time. The point where the two metals touch creates resistance to the flow of current. This resistance causes heat, which melts the metals and creates the weld. Resistance welding is widely employed in many fields of sheet metal or wire manufacturing and is often used for welds made by automatic or semi-automatic machines especially in automobile industry.

2 года назад

Предмет: Русский язык, автор: desint235

Способ образования слова сгибать.

8 лет назад

Предмет: Русский язык, автор: harryhonor89sqd

Какой поставить знак на месте вопроса : вдали сада мы видим много людей, они прогуливаются по саду ? кто то просто сидит на скемейке

8 лет назад