Предмет: Литература, автор: соня323

какой смысл Пришвин вложил в название кладовая солнца

Ответы

Автор ответа: Gyn9

с одной стороны это сказочное место где под ногами трясина, растут ёлочки-старушки, летает ворон, говорящий на своём языке, болото, враждебное человеку. С другой стороны автор говорит от имени разведчиков природных богатств, что Блудово болото со всеми огромными запасами горючего торфа есть кладовая солнца.Тысячи лето это добро под водой сохраняется, болото становится кладовой солнца, и потом вся эта кладовая солнца, как торф, достаётся человеку в наследство.

Предыдущий вопрос

Следующий вопрос

Похожие вопросы

Предмет: Русский язык, автор: WiZaRd9303

Помогите подобрать фразеологизм к слову
Выразить ,воздать уважение
СРОЧНО ,30 баллов

1 год назад

Предмет: Окружающий мир, автор: ksgg4838

доклад на тему о строительстве 2 класс

1 год назад

Предмет: Английский язык, автор: NIKASRIGA6646

Срочно нужен перевод на руссий язык.
Text “Automation”
Automation is the system of manufacture performing certain tasks, previously done by people, by machines only. The sequences of operations are controlled automatically. The most familiar example of a highly automated system is an assembly plant for automobiles or other complex products.

The term automation is also used to describe nonmanufacturing systems in which automatic devices can operate independently of human control. Such devices as automatic pilots, automatic telephone equipment and automated control systems are used to perform various operations much faster and better than could be done by people.

Automated manufacturing had several steps in its development. Mechanization was the first step necessary in the development of automation. The simplification of work made it possible to design and build machines that resembled the motions of the worker. These specialized machines were motorized and they had better production efficiency.

In the 1920s the automobile industry for the first time used an integrated system of production. This method of production was adopted by most car manufacturers and became known as Detroit automation.

The feedback principle is used in all automatic-control mechanisms when machines have ability to correct themselves. The feedback principle has been used for centuries. An outstanding early example is the flyball governor, invented in 1788 by James Watt to control the speed of the steam engine. The common household thermostat is another example of a feedback device.
Using feedback devices, machines can start, stop, speed up, slow down, count, inspect, test, compare, and measure. These operations are commonly applied to a wide variety of production operations.

Computers have greatly facilitated the use of feedback in manufacturing processes. Computers gave rise to the development of numerically controlled machines.

More recently, the introduction of microprocessors and computers have made possible the development of computer-aided design and computer aided manufacture (CAD and CAM) technologies. When using these systems a designer draws a part and indicates its dimensions with the help of a mouse, light pen, or other input device. After the drawing has been completed the computer automatically gives the instructions that direct a machining centre to machine the part.

Another development using automation are the flexible manufacturing systems (FMS). A computer in FMS can be used to monitor and control the operation of the whole factory.
Automation has also had an influence on the areas of the economy other than manufacturing. Small computers are used in systems called mod processors, which are rapidly becoming a standard part of the modern office. They are used to edit texts, to type letters and so on.

Many industries are highly automated or use automation technology in some part of their operation. In communications and especially in the telephone industry dialing and transmission are all done automatically. Railways are also controlled by automatic signaling devices, which have sensors that detect carriages passing a particular point.

Not all industries require the same degree of automation. Sales, agriculture, and some service industries are difficult to automate, though agriculture industry may become more mechanized, especially in the processing and packaging of foods.
The automation technology in manufacturing and assembly is widely used in car and other consumer product industries.

Nevertheless, each industry has its own concept of automation that answers its particular production needs.