Предмет: Математика, автор: Аноним

Из 24 м ткани сшили 8 одинаковых платьев. Сколько метров ткани нужно для того, чтобы сшить 16 таких платьев?
Реши задачу двумя способами.

Ответы

Автор ответа: uh19

4

1 способ

24 : 8 = 3 м - ткани нужно на одно платье
3 * 16 = 48 м - ткани нужно на 16 платьев

2 способ

16 : 8 = 2 - во столько раз увеличится количество платьев
2 * 24 = 48 м - ткани

Ответ: 48 м

Предыдущий вопрос

Следующий вопрос

Похожие вопросы

Предмет: Английский язык, автор: Аноним

Помогите пожалуйста
7. Complete the dialogue- нужно завершить диалог.

-Good bye - Nice to meet you - How old are you? - What’s your name?
- This is my friend - What about you? - I’m OK
Bob: Hello, I’m Bob. (34)_____________________________
Ann: Ann Smith. (35)_______________________________
Bob: Nice to meet you, too
Ann: (36)__________________________________, Mark.
Mark: How are you, Bob?
Bob: (37) ____________________________________
Mark: (38)_________________________________, Bob?
Bob: I’m fifteen. (39) ____________________________
Mark: I’m sixteen.
Ann: We must go. We have a lesson. Bye, Bob!
Bob: (40)_________________________________!
Mark: See you later

1 год назад

Предмет: Английский язык, автор: alina9660

Написати міні-твір(10-15 речень) про друга(неважливо як звати і хто це), на прикладі цього твору.

1 год назад

Предмет: Русский язык, автор: maryananawerty

Помогите отгадать загадкИ
1.На прогулку космонавт Надевает свой ..
2.В космосе сквозь толщу лет ледяной летит обьект.Хвост его полоска света А зовут обьект...
3.Всем планетам младший брат по размеру маловат.К солнышку всех ближе он Потому и раскалён.
4.Чтобы глаз вооружить и со звёздами дружить Млечный путь увидеть чтоб Нужен мочный..
6.Ни пера ни крыла а быстрее орла только выпустит хвост полетитвыше звёзд.

1 год назад

Предмет: Литература, автор: Аноним

Сочинить стих(не большой) другу(Олег) с поздравлением днем рождения.

7 лет назад

Предмет: Английский язык, автор: poks843

Перевести.
Geared traction machines are driven by AC or DC electric motors. Geared machines use worm gears to control mechanical movement of elevator cars by "rolling" steel hoist ropes over a drive sheave which is attached to a gearbox driven by a high-speed motor. These machines are generally the best option for basement or overhead traction use for speeds up to 3 m/s (500 ft/min).

Historically, AC motors were used for single or double-speed elevator machines on the grounds of cost and lower usage applications where car speed and passenger comfort were less of an issue, but for higher speed, larger capacity elevators, the need for infinitely variable speed control over the traction machine becomes an issue. Therefore, DC machines powered by an AC/DC motor generator were the preferred solution. The MG set also typically powered the relay controller of the elevator, which has the added advantage of electrically isolating the elevators from the rest of a building's electrical system, thus eliminating the transient power spikes in the building's electrical supply caused by the motors starting and stopping (causing lighting to dim every time the elevators are used for example), as well as interference to other electrical equipment caused by the arcing of the relay contactors in the control system.
Methods of removing condensed water
There are at least four ways to remove condensed water from the air conditioner. However, each solution has its pros and cons.

Atomizing
Atomizing, also known as misting the condensed water, is one way to dispose of the condensed water. Spraying ultra-fine water droplets onto the hot coils of the air conditioner ensures that the condensed water evaporates quickly.

Though this is one of the best methods to dispose of the condensed water, it is also one of the costliest because the nozzle that atomizes the water easily gets choked. The majority of the cost goes to maintaining the entire atomizing system.

Boiling
Disposing of condensed water works by firstly collecting the condensed water and then heating it to above boiling point. The condensed water is eventually evaporated, thereby disposing of it.

Consumers are reluctant to employ this system because of the high rate of energy used just to dispose of this water.

Cascading
The cascading method works by flowing the condensed water directly onto the hot coils of the air conditioner. This eventually evaporates the condensed water.

The downside of this technology is that the coils have to be at extremely high temperature for the condensed water to be evaporated. There is a chance that the water might not evaporate entirely and that would cause water to overflow onto the exterior of the car.

Drainage system
Drainage system works by creating a sump to collect the condensed water and using a pump to dispose of it through a drainage system.

It is an efficient method, but it comes at a heavy price because the cost of building the sump. Moreover, maintaining the pump to make sure it operates is very expensive. Furthermore, the pipes used for drainage would look ugly on the exterior. This system also cannot be implemented on a built project.

7 лет назад